Description
Measure Electrosmog Emissions and Dirty Electricity from Your Electrical Wiring and Appliances at Home
The ME3030B is an affordable, high-quality ELF EMF meter designed for serious measurement of EMF/LF electrosmog caused by household/building power supply and appliances, high-voltage power lines, electric rail, and more. It is easy to use, sensitive, and informative, with a digital display and sounder. It is particularly well-suited to electrically hypersensitive people who wish to reduce their EMF exposure to the lowest possible levels.
Accurate, Reliable Extremely Low Frequency EMF Meter
The ME3030B features advanced capabilities that make it an essential tool for surveys and post-mitigation analysis. The reading shows the total pollution directly in the entity corresponding to the building biology standard values without any calculation required. The "Geiger counter effect" helps identify areas of increased LF stress, and the detailed measurement instruction enables the user to perform relevant measurements of EMF – even without technical expertise. The manual includes recommendations for limiting values according to the standard of building biology SBM, which allows for a meaningful assessment of the personal level of EMF pollution. With the help of this instrument, you can spot even obscured sources of LF pollution.
Scientifically Accepted Measuring Methods with ELF EMF Meter
The ME3030B measures magnetic and electric fields based on scientifically accepted measuring methods and with high sensitivity (display resolution: 1 nT or 1 V/m). The device is fully frequency compensated, meaning that not only the 50/60 Hz mains frequency (e.g. high-voltage lines), but also the 16.7 Hz of the traction current overhead lines and natural harmonics 2 kHz are shown without distortion.
Take control of your EMF exposure with the ME3030B.
Order yours today and start measuring the electrosmog emissions from your electrical wiring and appliances.
Turn it on, set it to magnetic or electric field detection, and begin!
Features
-
Measures both electric and magnetic ELF fields
-
Easy to operate with no technical experience required
-
Reading shows the total pollution without any calculation required
-
Values are reliably displayed directly in units corresponding to the building biology standards
-
Electric field strength from 1 to 1999 V/m (against ground potential), and the magnetic flux density from 1 to 1999 nT (0.01mG to 20mG)
-
An acoustic signal proportional to the field strength with "Geiger-counter-effect" helps in identifying regions with more exposure
Benefits
-
Understand your environment through dual measurements of electric and magnetic ELF fields
-
Effortlessly assess EMF levels, no technical knowledge necessary
-
Immediate insights into pollution levels, no calculations required
-
Measurements adhere to building biology standards for a safer space
-
Wide measurement range detects subtle electromagnetic variations effectively
-
Audible signal pinpoints high EMF areas, aiding targeted exposure reduction
What's Included
-
Factory calibrated ME3030B ELF EMF meter
-
Battery
-
Earthing lead
-
Instructions with building biology recommendations
Specs
| Item weight: |
0.40 kg
|
| Frequency range: |
16 Hz - 2 KHz (compensated, better than -2 dB)
|
| Scope of delivery: |
Measuring device
Grounding cable
Alkaline manganese battery
Detailed instruction manual with neutral background Information
|
| Measurement range: |
Magnetic flux density (one-dimensional): 1 - 1999 nT
Electric field strength: 1 - 1999 V/m
|
| Precision: |
+/- 2 %, +/- 14 digits @ 50/60 Hz
|
| Sensor: |
E-field sensor for electric LF alternating fields
H-field sensor for magnetic LF alternating fields (one-dimensional)
|
| Audio analysis: |
Sound signal proportional to field strength (with "Geiger counter effect", switchable)
|
| Signal rating: |
RMS
|
| Power supply: |
9-volt E-block alkaline manganese battery (included), average operating time: 24 to 36 hours (depending on operating mode)
Low-battery indicator
Auto power-off function
|
| Warranty: |
2 years
|
NOTE
The meters supplied by Anti-Radiation are manufacturer calibrated and are suitable for general use. Customers who wish to use our meters for certain types of formal testing, for example occupational EMF assessment to meet the needs of the UK HSE or EU EMF Directives, will most likely need to arrange for certification of individual units at an approved calibration facility. This type of certification is a common requirement for many types of test equipment, not just EMF meters.
- This meter is for Power Frequency (ELF) EMFs - please see my other items for RF meters suitable for measuring EMFs from mobile phones etc.
- The measurement range of this meter may be exceeded (without damage) directly underneath 275kv and 400kv overhead lines.
Manual
ME3030B Manual
Returns
30-day returns. Let us know within 14 days of delivery that you would like to return your item, then you have a further 16 days to send it back. To start a return, email info@anti-radiation.co.uk with your order number or message our live chat.
Items must be complete and in their original packaging, and are returned at your cost using a tracked service. We refund within 14 days of receiving the item back.
You're welcome to open the packaging to inspect your item. If a change-of-mind return comes back without its original packaging, or with packaging too damaged to resell it in, or needing cleaning before it can be resold, we deduct up to 10% to cover replacement packaging or cleaning. Nothing is deducted for items that arrive faulty, damaged or incorrect; please tell us about these within 2 days of delivery.
EMF meters and detectors: once used, a meter can no longer be sold as new, so if a change-of-mind return of a meter has been used we deduct 10% from the refund to reflect this loss in value. Nothing is deducted for an unused meter returned complete and in its original packaging.
Warranty
We offer a 2 year manufacturer warranty on this product. This warranty extends only to the purchaser and terminates upon ownership transfer. It does not extend to commercial or institutional use or installation. This warranty is void if the device is subject to alteration, misuse, accident or repair.
This warranty is also void if the device has been operated or maintained in deviation from the provided instructions. The guarantee extends only to manufacturing defects and does not cover any damages resulting from the mishandling of the product. This warranty does not cover any normal wear and tear due to usage.
