Description
One shielding wallet case designed to fit the phone you already own
Many shielding phone cases are limited to a small selection of specific models. The WaveWall Universal takes a more adaptable approach, using three case sizes and a sliding attachment platform to accommodate a wide range of phones.
It combines directional shielding with the everyday practicality of a folio-style phone case and card holder. That makes it a useful option for older phones, less common models or anyone who cannot find a model-specific shielding case.
How does the directional shielding work?
The body-facing panel incorporates metallic fibres designed to reduce radiofrequency energy travelling through that section of the case. WaveWall markets the Universal as reducing mobile-phone radiation travelling towards the body by up to 85% when correctly positioned.
This is a directional product, not an all-round Faraday enclosure. It does not eliminate every emission from the phone or shield the uncovered sides. Actual results can vary according to the phone, signal strength, network, orientation and use.
Keep the shielded side in the right position
When carrying the phone against your body, keep the embossed WaveWall logo between your body and the phone. During calls, close the front cover so the shielded panel is positioned between the screen and your head.
The remaining sides are left unshielded so your phone can continue connecting to mobile networks, Wi-Fi and Bluetooth.
A flexible fit with a sliding camera platform
The phone—or preferably a separate hard or silicone shell case—attaches to the internal sliding platform using the supplied adhesive pad. Slide the platform upwards when you need to expose the rear camera, then return it to the normal position afterwards.
Using a separate shell case gives the phone additional physical protection and avoids applying the permanent adhesive directly to the device. It can also make it easier to move the WaveWall case to another compatible phone later.
Features
-
Directional metallic-fibre shielding built into the body-facing panel
-
Universal sizing for a wide range of phone makes and models
-
Sliding attachment platform provides access to the rear camera
-
Folio case and card holder in one accessory
-
Front cover helps protect the screen from scratches and scuffs
-
100% vegan faux-leather construction
Benefits
-
A shielding option for phones without a model-specific WaveWall case
-
Adds a body-facing shielding layer to your normal phone routine
-
Close the shielded cover between your phone and head during calls
-
Sliding mechanism keeps the rear camera accessible
-
Carry your phone and cards together in one wallet-style case
-
No charging, apps or settings required
-
Can be reused with another compatible phone using a suitable replacement adhesive pad
Choosing the Correct Size
Measure the complete length and width of your phone—not only its screen. If you intend to attach a separate hard or silicone case, measure the phone while it is inside that case.
| Small |
For phones up to 144 × 70mm |
| Large |
For phones up to 160 × 77mm |
| XL |
For phones up to 170 × 80mm |
Allow for thickness: the published size limits cover phone length and width, but an unusually thick phone or shell case may prevent the folio cover from closing comfortably. Do not select a size that leaves no allowance around the device.
How to Attach Your Phone
- Choose a compatible hard or silicone shell case for your phone. This is recommended instead of attaching permanent adhesive directly to the phone.
- Make sure the WaveWall sliding platform is in its lowest position.
- Apply the adhesive pad to the central area of the sliding platform.
- Remove the upper backing and press your separate shell case firmly onto the adhesive.
- Allow the adhesive to bond for at least 10–15 minutes before inserting your phone.
- Handle it carefully for the first 24 hours while the adhesive continues bonding.
- Slide the phone upwards when using the rear camera and return it to the lower position afterwards.
Important: check the attachment regularly. Stop using the case if the adhesive pad becomes loose, damaged or contaminated, and replace it before continuing.
Durability & Care
The hard-wearing vegan faux-leather outer, stitched edges, soft interior and folio cover are designed for repeated everyday handling. Using a separate shell case can provide additional support and physical protection for the phone itself.
Adhesive pads are attachment components and may eventually require replacement, particularly if they are removed, repositioned or exposed to dust and oils. Avoid repeatedly pulling the attached shell away from the sliding platform.
Do not overfill the card section, sharply bend the cover backwards or force an oversized phone into the case. Clean with a soft, slightly damp cloth and allow it to dry naturally. Do not soak or machine wash it.
This is an everyday folio case rather than a waterproof or certified rugged drop-protection case. For greater impact protection, use it with a compatible hard or silicone shell case.
Specs
| Approximate weight |
0.2kg |
| Small compatibility limit |
144 × 70mm |
| Large compatibility limit |
160 × 77mm |
| XL compatibility limit |
170 × 80mm |
| Colour |
Black with red accents |
| Material |
100% vegan faux leather with soft interior |
| Mounting method |
Adhesive pad and sliding platform |
| Shielding type |
Directional metallic-fibre layer |
Returns
30-day returns. Let us know within 14 days of delivery that you would like to return your item, then you have a further 16 days to send it back. To start a return, email info@anti-radiation.co.uk with your order number or message our live chat.
Items must be complete and in their original packaging, and are returned at your cost using a tracked service. We refund within 14 days of receiving the item back.
You're welcome to open the packaging to inspect your item. If a change-of-mind return comes back without its original packaging, or with packaging too damaged to resell it in, or needing cleaning before it can be resold, we deduct up to 10% to cover replacement packaging or cleaning. Nothing is deducted for items that arrive faulty, damaged or incorrect; please tell us about these within 2 days of delivery.
